The EESIFLO 5000 Series range of non-invasive flowmeters utilises ultrasonic technology for the accurate flow measurement of liquids in full pipes. The field mounted flow transmitter can be configured via the keypad without any additional programming devices and is available as single channel unit. The measurement of flow is based on the principle that sound waves are influenced by a flowing medium. Measurements are made by penetrating the pipe with ultrasound and subsequently time differences, frequency variations and phase shifts of the ultrasonic signals are evaluated.

This measuring technique has no effect on the flowing liquid. There is no pressure loss in the pipe and no wear on components of the measuring device. The ultrasonic sensors are clamped onto the outside of the pipe, thus eliminating the need to dismantle the pipework and interrupt the process. The EESIFLO 5000 Series can be applied to any type of standard pipe carrying clean or dirty liquids.

Applications

• Low installation effort and costs
• Measurement is independent of fluid conductivity and pressure
• No pressure loss, no possibility of leakage
• Retrospective installation for existing plants possible
• No cutting of pipes necessary, no interruption of process, no plant shut down
• No additional fittings for maintenance required
• Hygienic measurement, no risk of contamination, suitable for ultra clean liquids
• No contact with medium, no risk of corrosion when used with aggressive media
• Cost advantages when used with large diameter pipes, high pressure systems, etc.
• Low stocking costs, nearly all pipe sizes are covered with only 2 types of sensors

• Ultrasonic flowmeter in IP 66 wall mounted enclosure
• Easy to install clamp-on sensors with no process interruption
• Non-invasive flow measurement of liquids, no pipeline disturbance, no pressure loss
• Suitable for all commonly used pipe materials with pipe diameters from 10 mm to 2.5 m (1/2" to 100")

Our range of non-invasive flowmeters utilises ultra-sonic technology for the accurate flow measure-ment of liquids in full pipes. The portable device has been designed to meet the needs of the Service/Maintenance and Commis-sioning Engineer wishing to check the flow rate of liquids at different locations in the plant. The set-up of the unit is simple and user friendly in order to obtain the required flow information in minutes.

The measurement of flow is based on the principle that sound waves are influenced by a flowing medium. Measurements are made by penetrating the pipe with ultrasound and subsequently time differences, frequency variations and phase shifts of the ultrasonic signals are evaluated. The ultrasonic sensors are clamped onto the outside of the pipe, thus eliminating the need to dismantle the pipework and interrupt the process. The unit can be applied to any type of standard pipe carrying clean or dirty liquids.

Advantages

• Low installation effort and costs
• Dual measuring mode (transit-time and doppler)
• Measurement is independent of fluid conductivity and pressure
• No pressure loss, no possibility of leakage
• Retrospective installation for existing plants possible
• No cutting of pipes necessary, no interruption of process, no plant shut down
• No additional fittings for maintenance required
• Hygienic measurement, no risk of contamination, suitable for ultra clean liquids
• No contact with medium, no risk of corrosion when used with aggressive media
• Cost advantages when used with large diameter pipes, high  pressure systems, etc.

Features

• Portable dual mode flowmeter both TRANSIT TIME and DOPPLER mode without changing   sensors
• Easy to install clamp-on sensors with no process interruption
• Non-invasive flow measurement of liquids, no pipeline disturbance,  no pressure loss
• Suitable for all commonly used pipe materials with pipe  diameters from 6 mm to 6.5 m (1/4" to 256")
• Integrated wall thickness measurement, 2 flow channels

Copyright © 2010 Primayer Asia Co., Ltd. 55/142 Soi Ladprao 88, Praditmanutham Road, Plubpla, Wangthonglang, Bangkok 10310
Tel: 02-514-0412, 02-514-0448 FAX 02-514-0307 Email Sales@primayerasia.co.th Website: http://www.primayerasia.co.th